When performing your multi-family due diligence and walking a property that was built between 1978 – 1995 be on the look-out for Polybutylene supply lines.  Polybutylene (PB) was a plastic manufactured between 1978 and mid-1995 for use as piping in home plumbing systems. It was inexpensive and offered plenty of advantages over other materials, such as flexibility, ease of installation, resistance to freezing. Pipes made from polybutylene were installed in up to 10 million homes and apartments in the Unites States during that period. Despite its strengths, production was ceased in mid-1996 after scores of allegations surfaced claiming that polybutylene pipes were rupturing and causing property damage. In the homes an apartments that still contain this material, property owners must either pay to have the pipes replaced or risk a potentially expensive plumbing failure…

How Does Polybutylene Fail?
Two studies in particular in papers published by the University of Illinois at Chicago have shown that certain disinfectants can react with the polybutylene and cause it to flake apart at any location within the PB piping system. Small fractures can deepen over time and eventually work their way to the pipe’s exterior, allowing water to escape. Some manufacturers, however, claim that the majority of leaks occur at joints and unions, which is where a leak would likely appear if a pipe were improperly installed. Despite this contention, class-action lawsuits filed against PB manufacturers have been successful and resulted in payouts to homeowners reaching $1 billion.
Polybutylene Pipes Should Be Replaced
Although no regulations require the replacement of polybutylene piping with other material, many plumbers recommend doing this, at a cost several thousand dollars for a standard size home. The cost can be quite high for an entire apartment complex. Leaking can happen without warning and can result in flooding and serious damage to building’s interior if it is not immediately stopped. PB pipes installed behind drywall can leak unnoticed for long periods of time and cause mold and water damage. It’s far cheaper to replace polybutylene pipes before they fail and leak onto floors, appliances and furniture. They can also reduce a property’s value, prevent agency financing or prolong its time on the market. Property owners might face higher insurance premiums or be denied coverage entirely.  For property owners who are concerned about this problem and wish to replace the PB piping in their property with copper or other material, there are companies that specialize in this type of work.
Identifying Polybutylene
Tips to identify polybutylene plumbing. Polybutylene pipes are:
  • usually stamped with the code “PB2110”;
  • flexible and sometimes curved, unlike rigid piping materials such as copper;
  • not used for waste, drain or vent piping;
  • most commonly grey in color, but they can also be white, silver, black or blue. Blue PB is used primarily outdoors and should only be used to carry cold water. Inspectors should be aware that black or white pipes might not be polybutylene (they might be polyethylene or PVC, respectively). Also, PB color is somewhat region-dependant. For instance, experienced home inspectors in California might never come across grey PB, while it is quite common elsewhere;
  • ½” to 1” in diameter.

Polybutylene pipes can be in an apartments interior or exterior in any of the following locations:

Interior:
  • protruding from walls to feed sinks and toilets;
  • running across the ceiling in unfinished basements;
  • near the water heater.

Exterior:

  • entering the building through the wall;
  • at the water meter;
  • at the main water shut-off valve.
Note:
  • We have found copper supply coming from the wall making it appear the property was plumbed with copper, when in reality it was predominantly PB.  A common example of this union is where PB pipe links with copper “stub outs” that feed bathroom fixtures.
Other piping materials not to be confused with PB:
  • PEX (pictured at right):  Common in radiant-heating systems, this cross-linked polyethylene can be black, blue or red. It is more easily coiled and more flexible than PB. It can withstand higher temperatures than polyethylene.
  • PVC:  A popular building material commonly used in residential plumbing. CPVC is derived from PVC and is also used in plumbing. Both appear white or off-white and can be flexible or rigid.
  • Polyethylene:  This material is flexible and black.
  • Copper:  Copper is a metal that should never be confused with PB.
A pipe failure could cause catastrophic damage to a property. Checking with an insurance company during your due diligence period is recommended.
If you have any questions, contact us any time 321-368-9921.